Serving the Houston area  ·  (346) 322-2588  ·  Open Mon-Sat 7am-6pm
📞 (346) 322-2588 Free Quote

Spray Foam Insulation in Baytown, TX (77520) · Local Professionals

Houston Spray Foam Insulation · Fast response in Baytown and the Houston area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+29Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Baytown's older ranch neighborhoods run slab-on-grade with vented attics that hit 140-plus degrees from May through October, and those empty wall cavities that were never filled are costing you real money every month. Houston Spray Foam Insulation has been serving Baytown and the surrounding Houston area since 2012, and we know exactly what happens when a 1960s or 1970s brick ranch loses its original attic insulation to settling and compression.

When your cooling bill climbs and a room over the garage stays hot no matter what your AC does, or when you spot damp insulation or condensation in the attic or crawl space, that is when Baytown homeowners call us. We spray closed-cell and open-cell foam, seal the air leaks that let conditioned air escape, and pull out failed insulation before we start fresh. Our team is fully insured, and we show up with written estimates that name the R-value and thickness so you know exactly what you are getting.

Spray Foam Insulation in Baytown (77520)

Baytown sits in the industrial belt between the Energy Corridor and the Ship Channel, and the housing stock runs the full spectrum: older ranch homes on slab with vented attics, some industrial and commercial properties, and newer residential scattered through. The challenge is always the same. Your attic is not conditioned space. It is a heat sink in summer and a humidity trap year-round. Ductwork runs through it because that is how the houses were built, and every foot of duct in a 145-degree attic loses cooling before it reaches the room you are trying to condition. The Gulf Coast humidity means moisture comes at your insulation from the outside in, especially in spring and after rain. If your attic insulation has been there since 1975, it has settled into a pancake. If you have wall cavities with no insulation at all, that is a direct path for heat and humidity into your living space. Crawl spaces under slab-on-grade homes sweat in summer and pull moisture up through the rim joist and band joist into the first floor. We have been sealing and insulating these exact problems in Baytown for over a decade.

Our services in Baytown

How a Job Works in Baytown

We start with a free on-site assessment. Our team walks your attic, crawl space, or the walls you want sealed, and we listen to what is happening. Is your insulation wet or matted? Does the attic smell musty? Is one room always the wrong temperature? We measure the space, check for moisture, and talk through whether you need closed-cell foam (higher R-value per inch, vapor barrier properties, and the right choice for a damp attic or crawl space) or open-cell foam (lower cost, breathable, and the right call for a dry attic that just needs R-value). Then we give you a written estimate with the R-value, thickness, and price before we touch anything.

On the job, we show up with the equipment and crew to spray. If insulation has to come out first, we remove it and haul it away. We set up mechanical ventilation so the smell during cure does not drift into your living space. We spray the foam at the manufacturer ratio and drum temperature, layer by layer, to the thickness and R-value in your estimate. The work is dirty and technical, and we manage it so you can stay in the house. Most jobs in Baytown are attics or crawl spaces, and access can be tight in those older ranch homes, so we plan accordingly.

When the foam has cured, we walk through with you, clean up the property, and answer any questions. We leave your attic or crawl space clean and ready. The re-entry window is typically twenty-four to forty-eight hours before you use the space normally.

Attic spray foam in Baytown runs from around $1.50 per square foot for open-cell to higher for closed-cell, depending on the R-value you need and whether insulation has to come out first. A typical 1,500-square-foot attic top-up with open-cell foam starts around $2,250 to $3,000. Closed-cell is more, but it handles moisture and gives you a vapor barrier, which matters in our climate. Wall injection foam for those empty cavities in your 1960s ranch runs from $2 per square foot. Crawl space foam starts at $2,500 and goes up with the area and moisture conditions. If you have failed insulation that needs to come out, removal runs from $950 depending on how much there is. The biggest cost factors are the square footage, the R-value you are targeting, whether you need closed-cell or open-cell, and what has to be removed or repaired first. Call us at (346) 322-2588 for a free estimate on your Baytown property. We will walk the space, measure it, and give you a price in writing.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Baytown and nearby areas.

My attic insulation is matted down and the attic smells musty. What do I do before you spray?
Stop right there. Wet or moldy insulation has to come out before we spray anything. We remove it, haul it away, and let the attic dry out. If there is standing water or active moisture coming in from a roof leak or gutter problem, that has to be fixed first or we walk away. Once the substrate is dry and sound, we spray the foam. Call us at (346) 322-2588 and we will assess what you have got.
I live in a 1970s ranch in Baytown with empty wall cavities and no insulation between the studs. Can you fill them?
Yes. Wall injection foam is made for exactly this: closed-cell foam injected into the cavities from the outside or inside, depending on your walls and what makes sense for your home. It fills the cavity completely, seals air leaks, and gives you an R-value of about 6.5 per inch. In a Baytown humidity climate, this is a smart upgrade. We give you a written estimate with the R-value and cost per square foot, and the work is typically done in a day.
How much does it cost to spray foam my attic in Baytown?
Attic foam starts around $1.50 per square foot for open-cell. A typical 1,500-square-foot attic runs $2,250 to $3,000 with open-cell, more with closed-cell. The actual price depends on how much area you have, the R-value you want, whether insulation has to come out first, and how tight the attic access is. Call (346) 322-2588 and we will give you a real number based on your home.
What does the Baytown building code require for attic insulation, and who inspects it?
The City of Baytown enforces the energy and building code in force at your address. The code sets minimum R-values for attic insulation, and it also governs ignition barriers and thermal barriers around the foam. The fifteen-minute thermal barrier is the rule most installers get wrong, and it matters. Your local building official in Baytown will tell you what applies to your home and what requires a permit. We help you navigate what is required at your address, and we build to code.
Can I stay in my house while you spray foam in the attic? What about the smell?
Yes, you can stay. We set up mechanical ventilation during the spray and cure so the smell stays in the attic and does not drift into your living space. The re-entry window is typically twenty-four to forty-eight hours before the attic is safe to use normally. If you have young children or pets, let us know and we will coordinate the timing. We are fully insured for the work, and we manage the job so your family is not displaced.
Are you insured for spray foam insulation work?
Yes. We are fully insured with general liability and workers' compensation. Any contractor doing spray foam insulation in your Baytown home should be able to show you proof of insurance. Ask to see it, and verify it is current. We carry the coverage you need, and we are happy to provide documentation.
When is the best time to spray foam my Baytown attic, and how long does it take?
Summer in Baytown is brutal for cooling bills, and that is when most homeowners call us. But the best time to spray is actually spring or fall, when the weather is mild and the attic temperature is not 145 degrees. Winter works too. The work itself takes a day or two depending on the size of the attic and what has to come out first. Once the foam cures, you get the benefit all year. If your bills are out of control right now, call us at (346) 322-2588 and we will get you on the schedule.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Houston

All your work handled by qualified professionals in Houston

Attic Spray Foam Insulation

Sealed attics that pull Houston ductwork in out of 150-degree heat

Included in your service

  • Open-cell foam on the roof deck, never the attic floor
  • Your ductwork brought in out of 150-degree attic air
  • Target R-value and thickness per pass written into the estimate
  • Gable and ridge details closed properly for a Gulf Coast attic
Learn more

Closed Cell Spray Foam Insulation

Two-pound foam for where Gulf Coast moisture pushes hardest

Included in your service

  • R-6.5 per inch with its own built-in vapor retarder
  • The right call for Waller metal shops and Heights crawl spaces
  • Racked in controlled passes, never one thick lift
  • Depth gauged at the wall, because Gulf humidity punishes a thin pass
Learn more

Open Cell Spray Foam Insulation

The friendlier board foot for Houston attics and interior walls

Included in your service

  • Half-pound foam that air-seals at a lower cost per board foot
  • Sound dampening between bedrooms, media rooms and shared walls
  • Where Gulf humidity calls for closed cell instead, we say so
  • Shaved flush to the framing and the offcuts bagged out
Learn more

Wall & Injection Foam Insulation

Closed walls filled without opening up a Meyerland ranch

Included in your service

  • Small ports drilled between studs, then plugged and patched
  • Built for the 1950s-70s brick stock with empty wall cavities
  • Priced room by room so you can start with the hot one
  • Every cavity probed for fill rather than assumed full
Learn more

Crawl Space Spray Foam Insulation

Pier-and-beam undersides sealed against Houston's wet air

Included in your service

  • Closed cell on the subfloor and the perimeter walls
  • Common work on Heights, Montrose and East End bungalows
  • Standing water and drainage fixed first, or we decline the job
  • Full encapsulation referred out; the insulation is ours
Learn more

Rim Joist & Band Joist Spray Foam

The small job that finally fixes the room over the garage

Included in your service

  • Cantilevers and band joists sealed bay by bay on slab-built homes
  • No basements in Houston, so it is bonus-room floors that leak
  • Half a day on site and felt the same evening
  • Gun-applied into framing gaps a batt has never reached
Learn more

Garage Spray Foam Insulation

Turning a Cypress garage oven into square footage you can use

Included in your service

  • Ceiling bays under bonus rooms filled and shaved flush
  • Walls shared with the house sealed against radiant afternoon heat
  • Workshop conversions specified around the tools you actually run
  • The door header and slab edge addressed, not stepped over
Learn more

Metal Building & Barndominium Spray Foam

The only insulation that stops a Texas shop from sweating

Included in your service

  • Closed cell straight to the underside of the roof panels
  • Waller, Hockley and Magnolia acreage shops and pole barns
  • Condensation control settled before R-value is even discussed
  • Purlins and fastener lines sealed, not sprayed around
Learn more

Commercial & New Construction Spray Foam

Houston warehouses and production builds kept on their own schedule

Included in your service

  • Shells and warehouses from the Energy Corridor to the Ship Channel
  • Code-compliant assemblies documented for your inspector
  • Phased around occupied floors and the Gulf Coast build calendar
  • Ignition and thermal barrier requirements settled up front
Learn more

Insulation Removal

In a Houston attic, the old comes out before anything new goes in

Included in your service

  • Vacuumed straight to the truck and bagged, never buried
  • Failed spray foam cut out, the job most installers will not touch
  • Vermiculite flagged for testing and left undisturbed
  • The usual first step on 1950s-70s Meyerland and Spring Branch ranches
Learn more

Insulation Replacement & Re-Insulation

A full reset for Houston attics twenty years past their job

Included in your service

  • Removal, air sealing and new foam handled as one scope
  • For material left flattened, storm-wet or water damaged
  • Built to current code R-values, not to what was there in 1978
  • One crew and one price, with no handoff between trades
Learn more

Air Sealing

The cheapest comfort fix in a Houston house, and it comes first

Included in your service

  • Top plates, wiring chases, can lights and the attic hatch
  • Sealed before insulating so the R-value can actually perform
  • Thermal camera images before and after, shot in the Houston heat
  • Priced as its own job, never bundled in to pad a quote
Learn more
Verified client reviews

29+ Verified Client Reviews in Houston

⭐⭐⭐⭐⭐ 4.9/5 · 29 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Houston · Response within 24h · No commitment · ☎ (346) 322-2588

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Houston ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm